|
Strap Tables |
  
|
|
Strap Tables |
|
EnergySteward.com performs net (calculated) barrel calculations for oil run tickets. A common list of strap tables can be setup in the configuration strap table area. Once these strap tables are defined then they can be assigned to the various meters/wells (typically 'tank' type meters/wells) through these screens. This particular screen allows for setting up which strap table to utilize for the tanks belonging to a lease.
Add Strap Table (button) - Click this button to add a new strap table entry for the meter/well.
View/Edit Grid Button (pencil) - Click this next to the applicable strap table entry in order to change any of the information relevant to the entry.
Delete Grid Button (red x) - Click this next to the strap table that you want to permanently delete. When you delete a strap table, then only the specific meter/well strap table assignment is removed. Important note: You will be presented with a confirmation ("Are you sure...?") dialog box prior to deletion.
The following shows the screen which you are presented with when adding or updating a meter/well strap table association.
Strap Table Name (drop down list box) - Select the strap table name from the list of available strap tables. See the configuration meter/well strap table area for creating/updating meter/well strap table entries. The strap tables and their respective increment values should be defined prior to assigning the strap tables to a given set of meter(s)/well(s).
Effective From (popup calendar) - This is a required field. It will default to '01/01/1800'. This should be left at the default value unless date effectiveness for this strap table assignment is important.
Effective Thru (popup calendar) - This is a required field. It will default to '12/31/3000'. This should be left at the default value unless date effectiveness for this strap table assignment is important.
Notes - This area allows you to specify any relevant notes about this strap table assignment.