|
Chart Designation |
  
|
|
Chart Designation |
|
Within EnergySteward.com each individual meter/well can have designated chart designations. This designation is optional. It is informational. It specified the manner in which measurements are captured. Used primarily for web portal access by operators, producers, etc.
The following screen shot shows the list of chart designations which are setup for a given meter/well over time.
Add Chart Designation (button) - Click this button to manually add a new chart designation entry for the meter/well.
View/Edit Grid Button (pencil) - Click this next to the applicable chart designation entry in order to change any of the information relevant to the entry.
Delete Grid Button (red x) - Click this next to the chart designation that you want to permanently delete. When you delete a chart designation, then only the specific meter/well designation to the meter/well is removed. Important note: You will be presented with a confirmation ("Are you sure...?") dialog box prior to deletion.
The following shows the chart detail which you are presented with when adding or updating a meter/well chart designation.
Effective From (popup calendar) - This is a required field. It will default to '01/01/1800'. This should be left at the default value unless date effectiveness for this chart designation is important.
Effective Thru (popup calendar) - This is a required field. It will default to '12/31/3000'. This should be left at the default value unless date effectiveness for this chart designation is important.
Contract Hour - This is the hour of the day (in military time) which is where the volume measurement begins (ie... 9 would be 9AM thru 8:59AM the following day).
Chart Days - This indicates the chart days Not applicable on electronic meters/wells.